This is an old revision of the document!
<markdown>
# OBC 조립 #
5V 들어 갔을때 OBC 보드에 전원이 들어가는 부분
LTC4362-1 : 1.2A Overvoltage/ Overcurrent Protector
http://cds.linear.com/docs/Datasheet/436212fa.pdf
LTC4411 : 2.6A Low Loss Ideal Diode
- CTL(Pin3) Contolled Shutdown Pin. - Tie to GND to enable. - Pull this pin high to shut down the IC
http://cds.linear.com/docs/Datasheet/4411fa.pdf
SN65HVD11QD : 3.3-V RS-485 TRANSCEIVERS
http://www.ti.com/lit/ds/symlink/sn65hvd11.pdf
MAX890L : 1.2A Current-Limited High-Side P-Channel Switch with Thermal Shutdown
SET 저항 30k ohm을 넣어주어 전류 제한 설정.
http://datasheets.maxim-ic.com/en/ds/MAX890-MAX890L.pdf
TPS73233 : Single Output LDO, 250mA, Fixed(3.3V), Fast Transient Response, Reverse Current Protection
http://www.ti.com/lit/ds/symlink/tps73233.pdf
TPS3838
Reset Supervisor
reset pull-up vdd/50uA </markdown>