cirqoid
This is an old revision of the document!
Desktop cnc for fabricating PCB
- Y axis zero points difference 0.816
- Reference point X coordinate 7.03
- Reference point Y coordinate 72.04
- Z offset -15.18
- Contour milling Z offset -11.1
Two Path Setting
- Insulation Milling (First Path)
- Tool Diameter 0.255mm
- Tool Speed 1390us
- Feed X and Y axes 1000.0 mm/min
- Feed Z axis 200.0 mm/min
- Arcs 30%
- Additional passes Count 2
- Insulation Milling (Second Path)
- Tool Diameter 0.18mm
- Speed 1390us
- Feed X and Y axes 250.0 mm/min
- Z axis 200.0 mm/min
- Arcs 100%
- Additional passes Count 0
Milling Order
- Bottom → Top → Drill → Contour
Cad Setting
- Standard (most wires): 0.024“ = 0.6096 mm
- Narrow spaces: 0.016” = 0.4064 mm
- Between DIP pins (0.100“ pad spacing): 0.012” = 0.3048 mm
- Do not use default 0.010“ traces = 0.254 millimeters
N/C Drill: 0.6mm, 1.1mm, 1.2mm, 1.8mm, 3mm
Reference
cirqoid.1428837355.txt.gz · Last modified: 2018/07/18 14:09 (external edit)